Electric Vertical Multistage Stainless Steel Booster Jockey Centrifugal Feed Pipe Line System Pump Set

• After-sales Service: 1 Year
• Warranty: 1 Year
• Max.Head: >150m
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: QDL
• Max.Capacity: >400 L/min
• Driving Type: Motor or Diesel Engine
• Impeller Number: Single Stage or Multistage
• Working Pressure: Low Pressure or Middle Pressure or High Pressure
• Influent Type of Impeller: Single Suction or Double Suction
• Position of Pump Shaft: Horizontal or Vertical
• Pump Casing Combined: Horizontal Split or Verticaljoint Surface Pump
• Mounting Height: as Per Customer′s Requirements
• Impeller: Open or Semi Open or Closed
• Usage: Pump, Pumps, Pumping Water or Chemical or Slurry
• Material: Stainless Steel
• Structure: Multistage Pump
• Assembly: Liquid Pumps
• Power: Electric
• Type: Centrifual Pump
• Industry: Water Pump
• Media: Clear Water Pump
• Certificate: SGS.ISO, CE.TUV.BV
• Pump Type: Vertical
• Other Application: Water Supply, Boiler Feed Water, Mine, Chemical an
• Stages: 2-12
• Brand: Anpump
• Flow: 50~700m3/H
• Head: 5-600m
• Warrenty: 1 Year
• Transport Package: Wooden Case
• Specification: CE, ISO, SGS. TUV. BV
• Trademark: An Pump
• Origin: Hebei
• HS Code: 8413709990
• Production Capacity: 20000PCS/Year
• Package Size: 1000.00cm * 500.00cm * 500.00cm
• Package Gross Weight: 50.000kg

Product Description

Vertical Multistage Centrifugal Feed Water Pump

 

±±±±±±± OVERVIEW ±±±±±±

Overview about High pressure Centrifugal vertical multistage Water pump

For this series horizontal multistage centrifugal vertical water pump, both ends of it are supported, the casing portion is in a sectional form. it is connected to and actuated by a motor via a resilient clutch and the rotating direction of it. viewing from the actuating end. is clockwise. Refer to Fig. I for the structure of it.

±±±±±±± Features ±±±±±±

Features about High pressure Centrifugal vertical multistage Water pump

Stator portion

Marine vertical residential reverse osmosis pump consists of suck-in section. middle-section, spitting section, guide vane, packing etc., which are linked together with a take-up bolt. with both suck-in and spitting mouths vertically upward.

Rotor portion

Consists of a shaft, impeller, balancing disk, muff etc. Parts.

Bearing portion

The whole rotor is supported by the roller bearings or sliding bearings on both ends of the shaft and the bearings are lubricated with grease or 20# engin oil.

Cooling and seal of residential reverse osmosis pump

The joint-part between suction section, intermediate section and discharge section with be coated with molybdenum disulfide lubricating grease as seal. Rotor and fixed parts will be sealed by seal ring, guide-vane jacket and packing. The packing tensile degree of shaft seal should be proper and seep should be feasible dip by dip Unload run should be forbid. The seal ring and guide vane jacket should be replaced if they are too worn to be used any more and even do harm to pump work. There is spare shaft sleeve near shaft seal to protect shaft of pump.

 

±±±±±±± Construction ±±±±±±

Construction of High pressure Centrifugal vertical multistage Water pump

 

 

±±±±±±± Performance ±±±±±±

Performance table list about High pressure Centrifugal vertical multistage Water pump

 

QD(G) Series multistage pump data
Pump Type	Flow	Head	Power
	(m3/h)	(m)	(KW)
QDL 6-25	3-7.5	73.5-306	4-11
QDL12-25	7.5-15	69-338.4	5.5-22
QDL12-50	7.5-15	139.5-648	18.5-75
QDL25-30	15-30	82.5-340	15-45
QDL25-50	15-30	15.78-618	22-110
QDL46-30	30-55	81-340	22-75
QDL46-50	30-55	138-666	37-132
QDL 85-45	55-100	78-459	37-160
QDL 85-67	55-100	183-666	90-250
QDL155-67	100-185	177-684	132-400
QDL280-43	185-335	114-423	160-450
QDL280-65	185-355	372-680	500-800
QDL450-60	335-684	171-650	360-3400

±±±±±±± Packaging and Shipping ±±±±±±

Packaging and shipping about High pressure Centrifugal vertical multistage Water pump

Dear Valuable Client,

Good day!

This is Yvonne from An Pump Machinery Co., Ltd, really glad to contact with you. 

Our factory An Pump is a professional centrifugal pump manufacturer with nearly 40 years experience.
We can supply different slurry pumps and water pumps. We also have professional technical team to support OEM.

Do you have any new requirements for pumps recently?  If yes, welcome send us new inquires, we'll quote you our best price. 

 

Yvonne Zhang

AN PUMP MACHINERY CO., LTD.