| Max.Head: | >150m |
|---|---|
| Max.Capacity: | >400 L/min |
| Driving Type: | Motor |
| Material: | Stainless Steel |
| Structure: | Multistage Pump |
| Assembly: | Booster Pump |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
±±±±±±± OVERVIEW ±±±±±±
Overview about High pressure Centrifugal vertical multistage Water pump
For this series horizontal multistage centrifugal vertical water pump, both ends of it are supported, the casing portion is in a sectional form. it is connected to and actuated by a motor via a resilient clutch and the rotating direction of it. viewing from the actuating end. is clockwise. Refer to Fig. I for the structure of it.
|
|
|
±±±±±±± Features ±±±±±±
Features about High pressure Centrifugal vertical multistage Water pump
|
Stator portion Marine vertical residential reverse osmosis pump consists of suck-in section. middle-section, spitting section, guide vane, packing etc., which are linked together with a take-up bolt. with both suck-in and spitting mouths vertically upward. |
|
Rotor portion Consists of a shaft, impeller, balancing disk, muff etc. Parts. |
|
Bearing portion The whole rotor is supported by the roller bearings or sliding bearings on both ends of the shaft and the bearings are lubricated with grease or 20# engin oil. |
|
Cooling and seal of residential reverse osmosis pump The joint-part between suction section, intermediate section and discharge section with be coated with molybdenum disulfide lubricating grease as seal. Rotor and fixed parts will be sealed by seal ring, guide-vane jacket and packing. The packing tensile degree of shaft seal should be proper and seep should be feasible dip by dip Unload run should be forbid. The seal ring and guide vane jacket should be replaced if they are too worn to be used any more and even do harm to pump work. There is spare shaft sleeve near shaft seal to protect shaft of water pump set. |
±±±±±±± Construction ±±±±±±
Construction of Cast Iron Agriculture High Pressure Motor Water Pump
±±±±±±± Performance ±±±±±±
Performance table list about High pressure Centrifugal vertical multistage Water pump Set
| QD(L) Series multistage pump data | |||
| Pump Type | Flow | Head | Power |
| (m3/h) | (m) | (KW) | |
| QDL 6-25 | 3-7.5 | 73.5-306 | 4-11 |
| QDL12-25 | 7.5-15 | 69-338.4 | 5.5-22 |
| QDL12-50 | 7.5-15 | 139.5-648 | 18.5-75 |
| QDL25-30 | 15-30 | 82.5-340 | 15-45 |
| QDL25-50 | 15-30 | 15.78-618 | 22-110 |
| QDL46-30 | 30-55 | 81-340 | 22-75 |
| QDL46-50 | 30-55 | 138-666 | 37-132 |
| QDL 85-45 | 55-100 | 78-459 | 37-160 |
| QDL 85-67 | 55-100 | 183-666 | 90-250 |
| QDL155-67 | 100-185 | 177-684 | 132-400 |
| QDL280-43 | 185-335 | 114-423 | 160-450 |
| QDL280-65 | 185-355 | 372-680 | 500-800 |
| QDL450-60 | 335-684 | 171-650 | 360-3400 |
±±±±±±± Packaging and Shipping ±±±±±±
Packaging and shipping about High pressure Centrifugal vertical multistage Water pump
±±±±±±± About Us ±±±±±±
AN PUMP Brief Introduction:
Shijiazhuang An Pump Machinery Co., Ltd is a professional manufacturer of slurry pumps, sewage pumps, clean water pumps, chemical pumps, fire pumps, irrigation pumps; An Pump Machinery company has our own type selection & design, research and development team, Assure to provide our efficient energy-saving design, use and maintenance solutions for the slurry pumps, sewage pump, water pump, chemical pumps, fire pumps, irrigation pumps.
±±±±±±± Contact Us ±±±±±±
Contact AN PUMP for High pressure Centrifugal vertical multistage Water pump
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}