Tap Water Supply Ss Booster Pump System

• Max.Head: 3-700m
• Max.Capacity: 50~700m3/H
• Driving Type: Motor
• Material: Stainless Steel
• Structure: Multistage Pump
• Assembly: Liquid Pumps
• Model NO.: QDL
• Power: Electric
• Start Up: Electric Pump
• Type: Centrifual Pump
• Application: Clarified Water Pump, Sewage Pump, Oil Transfer Pump, Chemical Pump
• Industry: Water Pump
• Media: Clear Water Pump
• Performance: No Leakage Pump
• Theory: Centrifugal Pump
• Certificate: SGS.ISO, Ce.TUV.BV
• Pump Type: Vertical
• Other Application: Water Supply, Boiler Feed Water, Mine, Chemical an
• Frequency: 50Hz, 60Hz, Others
• Stages: 2-12
• Brand: Anpump
• Flow: 50~700m3/H
• Head: 5-600m
• Warrenty: 1 Year
• Usage: Mine, Plant Water Supply&Drainager, Water Circulat
• Pressure: High Pressure Pump
• Drive: Motor
• OEM: Available
• Transport Package: Wooden Case
• Specification: CE, ISO, SGS. TUV. BV
• Trademark: An Pump
• Origin: Hebei
• HS Code: 8413709990
• Production Capacity: 20000PCS/Year

Product Description

Tap Water Supply SS Booster Pump System
 

±±±±±±± OVERVIEW ±±±±±±

Overview about High pressure Centrifugal vertical multistage Water pump

For this series horizontal multistage centrifugal vertical water pump, both ends of it are supported, the casing portion is in a sectional form. it is connected to and actuated by a motor via a resilient clutch and the rotating direction of it. viewing from the actuating end. is clockwise. Refer to Fig. I for the structure of it.

±±±±±±± Features ±±±±±±

Features about High pressure Centrifugal vertical multistage Water pump

Stator portion

Marine vertical residential reverse osmosis pump consists of suck-in section. middle-section, spitting section, guide vane, packing etc., which are linked together with a take-up bolt. with both suck-in and spitting mouths vertically upward.

Rotor portion

Consists of a shaft, impeller, balancing disk, muff etc. Parts.

Bearing portion

The whole rotor is supported by the roller bearings or sliding bearings on both ends of the shaft and the bearings are lubricated with grease or 20# engin oil.

Cooling and seal of residential reverse osmosis pump

The joint-part between suction section, intermediate section and discharge section with be coated with molybdenum disulfide lubricating grease as seal. Rotor and fixed parts will be sealed by seal ring, guide-vane jacket and packing. The packing tensile degree of shaft seal should be proper and seep should be feasible dip by dip Unload run should be forbid. The seal ring and guide vane jacket should be replaced if they are too worn to be used any more and even do harm to pump work. There is spare shaft sleeve near shaft seal to protect shaft of pump.

 

±±±±±±± Construction ±±±±±±

Construction of High pressure Centrifugal vertical multistage Water pump

 

 

±±±±±±± Performance ±±±±±±

Performance table list about High pressure Centrifugal vertical multistage Water pump

 

QD(G) Series multistage pump data
Pump Type	Flow	Head	Power
	(m3/h)	(m)	(KW)
QDL 6-25	3-7.5	73.5-306	4-11
QDL12-25	7.5-15	69-338.4	5.5-22
QDL12-50	7.5-15	139.5-648	18.5-75
QDL25-30	15-30	82.5-340	15-45
QDL25-50	15-30	15.78-618	22-110
QDL46-30	30-55	81-340	22-75
QDL46-50	30-55	138-666	37-132
QDL 85-45	55-100	78-459	37-160
QDL 85-67	55-100	183-666	90-250
QDL155-67	100-185	177-684	132-400
QDL280-43	185-335	114-423	160-450
QDL280-65	185-355	372-680	500-800
QDL450-60	335-684	171-650	360-3400

±±±±±±± Packaging and Shipping ±±±±±±

Packaging and shipping about High pressure Centrifugal vertical multistage Water pump