Duplex Stainless Steel Paper and Pulp Pump
AJY series Two phase flow paper pulp pump is a product developed based on the original two phase flow pumps produced by An Pump Machinery through close market investigation and carefully listening to user's opinions. After studying the paper pulping and pater making processing and in order to adapt to the current pulping and paper making requirements. We have conducted careful analysis and research against the original paper pulp pump to optimize and reconstruct the original pump types based on sustaining and inheriting the merits of the original pumps to get rid of its shortcoming, in addition, we have introduced CAD to make its performance more reliable and more reliable in structure & more eye pleasing. It is and ideal updated production for your paper mill!
AJY Paper Pulp Pump Application:
It is widely used for conveying solidsparticles or fibers mixed liquid, the liquid temperature is not higher than 80 ºC, the use ofenvironment temperature not exceeding 40 ºC, conveying theslurry pump concentration is less than 6% for paper pulp or similar lightslurry and less than 10% for heavy duty sludge or so.
Our AJYZpump could be used in paper making,municipal engineering, mining, environmental protection and food industrial intransportation, pulp, sludge, manure, sewage and other liquid similar.
AJY Paper Pulp Pump Feature:
1. High efficiency, Energy saving: operation efficiency is 3- 10% higher than ordinary pulp pump, energy saving to 15-30%
2. Good NPSH, Long service: actual using life is twice-third time than ordinary pulp pump.
3. High concentrations, Non-clogging: transfer pulp concentration max to 6%.
4. Reasonable structure, Easy maintenance: Pump head is front, rear casing structure, when maintenance there is no need to remove pipe line, only remove the electric motor backwards, then could disassemble and repair the pump.
AJY Paper Pulp Pump Particularly Applicable Industry
1. Paper Industry: Suitable for transfer paper pulp concentration max to 6%, and liquid cycle transmission during base recovery processing, for lifting and pressing.
2. Sugar Industry: Suitable for transfer syrup max to 4%, and viscosity max 150 mm2/S.
3. Urban Sewage Treatment, Suitable for transfer sewage, waste water, for lifting and pressing
AJY Paper Pulp Pump Parameters:
Category |
No. |
Model |
Range |
Suction
Height
(m) |
Speed
(rpm) |
Eff.
(%) |
Motor &
Power |
Volume
Concentration
% |
| |
|
Flow
Q(m³/h) |
Head
H(m) |
|
|
|
|
|
| N |
4 |
AJY260- 16 |
155-310 |
15- 13 |
5 |
970 |
70 |
Y200L1- 18.5 |
4-6 |
| 5 |
AJY300-30 |
180-360 |
29.5-26 |
5 |
1480 |
72 |
Y225S-37 |
4-6 |
| 6 |
AJY370-30 |
220-440 |
29.5-26 |
5 |
1480 |
72 |
Y255M-45 |
4-6 |
| 7 |
AJY320-35 |
190-380 |
36-32 |
5 |
1480 |
72 |
Y225M-45 |
4-6 |
| 8 |
AJY400-35 |
240-480 |
34-29 |
5 |
1480 |
72 |
Y250M-55 |
4-6 |
P |
1 |
AJY130-38 |
80- 160 |
40-35.5 |
6 |
1470 |
68 |
Y180L-22 |
4-6 |
| 2 |
AJY120-32 |
70- 140 |
34-29 |
6 |
1470 |
68 |
Y180M- 18.5 |
4-6 |
| 3 |
AJY90- 17 |
55- 110 |
18- 15.5 |
6 |
970 |
68 |
Y160M-7.5 |
4-6 |
R |
1 |
AJY300- 15 |
180-360 |
16- 14 |
5 |
970 |
75 |
Y200L1- 18.5 |
4-6 |
| 2 |
AJY280- 12 |
170-340 |
13- 11 |
5 |
970 |
75 |
Y180L- 15 |
4-6 |
| 3 |
AJY430-32 |
260-520 |
34-29 |
5 |
1480 |
75 |
Y250M-55 |
4-6 |
| 4 |
AJY400-28 |
240-480 |
30-25 |
5 |
1480 |
75 |
Y225M-45 |
4-6 |
| 5 |
AJY340-25 |
210-430 |
27-20 |
5 |
1480 |
75 |
Y225S-37 |
4-6 |
| 6 |
AJY360-36 |
215-430 |
39-32 |
5 |
1480 |
75 |
Y250M-55 |
4-6 |
Q |
1 |
AJY370- 14 |
220-440 |
15- 13 |
5 |
970 |
77 |
Y200L2-22 |
4-6 |
| 2 |
AJY350- 12 |
210-420 |
13- 11 |
5 |
970 |
77 |
Y200L1- 18.5 |
4-6 |
| 3 |
AJY570-34 |
340-680 |
35-30 |
5 |
1480 |
77 |
Y280S-75 |
4-6 |
| 4 |
AJY330- 17 |
310-620 |
28-24 |
5 |
1480 |
77 |
Y250M-55 |
4-6 |
| 5 |
AJY700-32 |
200-420 |
19- 15 |
5 |
970 |
77 |
Y200L2-22 |
4-6 |
| 6 |
AJY500-27 |
550-780 |
37-29 |
5 |
1480 |
77 |
Y280M-90 |
4-6 |
S |
1 |
AJY800-25 |
480-960 |
26.5-23 |
5 |
1480 |
76 |
Y280M-90 |
4-6 |
| 2 |
AJY500- 10 |
300-600 |
11-9 |
5 |
970 |
76 |
Y200L2-22 |
4-6 |
T |
1 |
AJY500-43 |
300-600 |
44-40 |
5 |
1480 |
75 |
Y280M-90 |
4-6 |
| 2 |
AJY460-37 |
280-550 |
39-34 |
5 |
1480 |
72 |
Y280S-75 |
4-6 |
U |
1 |
AJY600- 14 |
360-720 |
15- 12 |
5 |
1480 |
76 |
Y225S-37 |
4-6 |
| 2 |
AJY720- 16 |
430-880 |
18- 14 |
5 |
1480 |
76 |
Y225M-45 |
4-6 |
| 3 |
AJY400-6 |
240-480 |
7-5 |
5 |
970 |
76 |
Y160L- 11 |
4-6 |
| 4 |
AJY480-8 |
300-580 |
10-7 |
5 |
970 |
76 |
Y180L- 15 |
4-6 |
V |
1 |
AJY250-5 |
150-300 |
6-4 |
5 |
970 |
76 |
Y132M2-5.5 |
4-6 |
| 2 |
AJY280-7 |
166-330 |
7.3-5 |
5 |
970 |
76 |
Y160M-7.5 |
4-6 |
| 3 |
AJY380- 12 |
225-450 |
13.5-9 |
5 |
1480 |
76 |
Y180M- 18.5 |
4-6 |
| 4 |
AJY400- 13 |
240-480 |
15- 10 |
5 |
1450 |
76 |
Y180L-22 |
4-6 |
W |
1 |
AJY130-5 |
80- 160 |
6-4 |
5 |
970 |
76 |
Y132S-3 |
4-6 |
| 2 |
AJY180-8 |
110-210 |
10-7 |
5 |
1440 |
76 |
Y132M-7.5 |
4-6 |
AJY Paper Pulp Pump Characteristic:
1. High efficiency and energysaving.
The efficiency of pulp conveyed by two phase flow pulp pumpis higher than pumping water and more than normal 3%-10% in efficiency.
2. Good cavitation performance andlong service life.
Since the flow design for two phase flow pulp pump meetsthe changing of solid flowing, the solids runs along the middle line ofimpeller while the impeller only produces attrition and the cavitationperformance improves along with the increasing of flows, the change iscomparatively stable, so the service life of AJYZ paper pulp pump is 2 or 3times than ordinary pulp pump under same work conditions.
3. The Water conservation modelfor the two phase flow pulp pump is designed by CAD with wide runner, high concentration,good corrosion resistance and block free property.
4. Reasonable structure, easymaintenance.
Since the pump head parts adopt the front rear doorstructure, it is not necessary to disassembly the pipes in maintenance. Thedisassembly and maintenance of the pumps are available only by moving the motorbackward.
5. The shaft seal adopts maze-lipdouble seal and the seal box is equipped with packing seal and various standardmechanical seals. All are leakage free at the user's option.
Company Information
An Pump Machinery is the pump factory approved by ISO9001, ISO14001 and OHSAS18001. We also have the certificate of CE. Our factory is over 50,000 square meters with the professional engineer over 20. The Max casting parts weight we could do one time is 7 tons. And we have capacity to produce 600 tons per month and with the heat treatment furnace dimension 6mx5.5mx2.5m. The Max parts we could machine is 6.4 meters and we have capacity to assemble the pump over 1800mm and our cranes capacity is 30 tons.
FAQ
1. Q: Are you a trading company or manufacture?
A: An Pump Machinery Co., Ltd is a real large professional manufacturer more than 32 years, in China, produce with our own factory.
2. Q: what's your factory workshops ?
A: My factory produce include casting, mechanical process, lathe process, heat treatment, assembly, and test etc.
Warmly welcome to visit & test my factory any time.
3. Q:How does your factory do regarding quality control?
A:"Quality is priority. we always attach great importance to quality controlling from the very beginning to the very end.
Our factory has 15~30 QC.
4. Q: Is it easy for customers to change the parts by myself ?
A: yes, the structure is simple ,customers can change it very easily. We will also supply you maintenance tools for free.
5. Q: How to do if the pump or parts have operation problem within your warranty?
A: Tell me details timely, and show me pictures, we will send you solution at once without any hesistation.
6. Q: .we don't know which pump model we need ,can you help us ?
A: yes, please tell me your detail requirements, include liquid, flow rate, head etc,<o:p>
my engineers team wiil calculate & select most suitable pump model for you, offer pump solution for you.
7. Q:How long can you reply us if we send an inquiry ?
A: Generall with in 2 hours, we will send you official quotation sheet, with price, technology data, performance curve, dimension etc.
Audited Supplier 
){kind=link}