Centrifugal End Suction Agricultural Irrigation Diesel Water Pump

• Max.Head: 110m-150m
• Max.Capacity: 1500m3/H
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Model NO.: agricultural irrigation diesel water pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Suction Centrifugal
• Impeller: Closed
• Usage: Circulating Pump
• Driver: Motor or Diesel
• Shaft Seal: Gland Packing or Mechanical Seal
• Connect: Direct or Belt Connect
• Impeller Material: Brass, Ss, or Cast Iron
• Stages: Single
• Certificate: TUV/SGS/ISO/Ce/BV
• Transport Package: Fumigated Wooden Case
• Specification: Class One
• Trademark: An Pump
• Origin: China
• HS Code: 8413709990
• Production Capacity: 800 Sets/Month

Product Description

Centrifugal end suction agricultural irrigation diesel water pump



Summarize about Centrifugal End Suction Agricultural Irrigation Diesel Water Pump
The agricultural irrigation diesel water pump of type QI is a single stage, single suction (axial suction) centrifugal for pumping clean water and the other liquids physically and chemically similar to the clean water.
Agricultural irrigation diesel water pump is desiged as per the interational standard ISO2858. The temperature of liquid shall not be over 80ºC. This pump is suitable for public water supply and drainage duties in industries and land irrigation also in agriculture.
 
Design duty and features about Centrifugal End Suction Agricultural Irrigation Diesel Water Pump
Speed      n:     2900rpm and 1450rpm
Inlet diameter:   50 to 300mm
Capacity  Q:      6.3 to 400m3/h
Head        H:      5 to 125m

Performance table list about Centrifugal End Suction Agricultural Irrigation Diesel Water Pump

Type	Flow (m3/h)	Head (m)	Power (KW)
QI50	3.4-15	3.7-68.8	0.55-11
QI65	6.8-30	3.7-126.8	0.55-30
QI80	13.6-60	3.6-128	0.55-45
QI100	27.3-120	3.4-115.5	1.5-75
QI125	56-240	8.5-132.5	2.2-110
QI150	99-240	12.4-57.5	15-55
QI200	197.7-460	14.8-55.8	30-90

Application for Centrifugal End Suction Agricultural Irrigation Diesel Water Pump

1)Clean, thin, non-corrosive, non-flammable or non-explosive liquid without grain or fiber;
2)Water supply system;
3)Heat, air condition system;
4)Booster, constant pressure water supply;
5)Firefighting, splitting system;
6)Irrigating, farming;
7)Industry cooling, heater circulation system;
8)Industry transferring, drainage system;

Advantages about Centrifugal End Suction Agricultural Irrigation Diesel Water Pump
20 years in producing agricultural irrigation diesel water pump
Independent Design
advanced technology from Australia, Canada, America
OEM available
Specialized Test Equipment
Anti-rust treatment casting
Supply reasonable suggestion for choosing pumps

FAQ of Centrifugal End Suction Agricultural Irrigation Diesel Water Pump
Attentions when connect agricultural irrigation diesel water pump inlet and elbow directly
It will lead uneven distribution the fluid when from the elbow to impeller if connect the water pump inlet and elbow directly. 
When the inlet diameter is greater than pump inlet should be installed eccentric adjustable tube. 
The eccentric different-diameter pipe flat face should installed upper and the slopes under. 
If not, the air will result increase the flow rate or can not suck the water and will have crashing noise.
If same for the diameters, should add a straight pipe between pump inlet and elbow. 
The length can not shorter than twice or three times of pipe diameter.

Constructions about Centrifugal End Suction Agricultural Irrigation Diesel Water Pump
1. QI model pumps are the series of products designed according to ISO international standards in all industries in China. It is mainly composed of pump body, impellers, seal rings, impeller nuts, pump cove r, seal parts, intermediate support, spindle, suspended parts and so on.
2. Structural features : the pump cover is fixed on the intermediate support, and the pump cover is clamped in the middle by coupling between pump body and intermediate support. On the pump body, water is input axially and output radially. Support feet can be fixed on t he bas e directly . The suspended parts are fixed onto the intermediate support through the rabbet, and are supported onto the base by suspended frame
3. Rotation direction: the pump is driven by motor directly through a prolonged coupling, seen from the side of the motor, it rotates clockwise.
4. Spindle seal patterns: spindle seal patterns o f pump are of two types such as stuffing seal and mechanical seal. The stuffing seal is that on stuffing casein pump cover , with software stuffing for sealing, input water of a certain pressure  into the stuffing case, for cooling, lubrication and cleaning on seal; mechanical seal is of two types such as single-surface mechanical seal and double-surface mechanical seal, input water of a certain pressure into the seal chamber, for washing  and cooling on the abrased surfaces.
Seal patterns of pump are of stuffing seal or mechanical seal, according to users' requirements, in a same time, seal chamber sizes and shaft gland patterns of other structures according to ISO3069 as required, are allowed, such as mechanical seals of corrugated pipes, assistant impeller seals and so on.



Performance curve chart about Centrifugal End Suction Agricultural Irrigation Diesel Water Pump




Inventory about Centrifugal End Suction Agricultural Irrigation Diesel Water Pump

Company Information 




ΞΞΞΞΞΞ CONTACT US ΞΞΞΞΞΞ

7x24Hours Online Contact Information