| Customization: | Available |
|---|---|
| After-sales Service: | 3 Years |
| Warranty: | 3 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
QS Double Suction Water Pump Introduction
Model QS water pump is a single-stage double-suction horizontal split centrifugal pump and used to transport pure water and the liquid of both physical and chemical nature similar to those of water, the maximum temperature of which must not be over 80ºc , suitable for water supply and drainage in factories, mines, cities and electric stations, waterlogged land drainage and irrigation of farming land and carious hydraulic projects. This model is widely used in agriculture irrigation, fire fighting, steel, power industry
QS Double Suction Water Pump Feature
QS pump is a single-stage double suction in the open centrifugal pump, used to transport pure water and physical and chemical properties similar to water liquid, its maximum temperature must not exceed 125 ºC,
(1) Have QS and QSH two types.
Viewed from drive engine, the direction of the QSH pump is anti-clockwise, that is the suction in the left, the discharge in the right. The rotating direction of the type QS pump is clockwise, that is the suction in the right, the discharge in the left. Also can move the driver to another edge according to the user's requires. Then, the rotating direction, the suction and discharge direction is in the opposite as the described above.
(2) Supply full set split-casing centrifugal pump, motor, coupling, the inlet diameter less than 200mm match the common base.
(3) The pump is axial split casing construction.
(4) Large capacity.
QS Double Suction Water Pump Application
Irrigation system: Agriculture irrigation,farm irrigation and spray irrigation
General water supply: Circulation of HVAC building systems,water booster service, boiler feed,general circulation service and more.
Agriculture/food/beverage: Irrigation,water supply,food processing,beverage processing ,fertilizers.
Manufacturing: Pulp and paper fans,plastic&rubber,metal&steel, pharmaceutical,paper mills,air wash,marine ballast service.
Fire/disaster relief: Fire pumps,fire protection,flood control,disaster relief, federal
Utilities Water/waste water: Power generation stations,desalination, energy recovery turbines
Chemical/mining: Chemical plants,refineries,petroleum distribution,coal sites, pumping.
| Model | Capacity | Head | Speed(rpm) | Power | Efficiency(%) | NPSH(m) | |
| (m3/h) | Shaft | Motor | |||||
| 15QS-78 | 112-200 | 55-84 | 2900 | 30-51 | 45-55 | 68-75 | 5 |
| 150QS-50 | 120-220 | 35-52 | 2900 | 18.5-31.3 | 30-37 | 70-80 | 5 |
| 200QS-95 | 160-288 | 70.2-100 | 2900 | 60.8-88.6 | 90-110 | 62 | 5.5 |
| 200QS-63 | 180-351 | 37.5-69 | 2900 | 41-67.8 | 55-75 | 65-80 | 4.7-6.2 |
| 200QS-42 | 198-342 | 31-48 | 2900 | 30.5-40.2 | 37-45 | 76-82 | 4.8-8.2 |
| 250QS-65 | 342-612 | 50-71 | 1450 | 76.7-129.6 | 110-132 | 72-79 | 4 |
| 250QS-39 | 324-612 | 25-42.5 | 1450 | 40.2-67.7 | 55-75 | 75-86 | 4 |
| 250QS-24 | 342-576 | 17.4-27 | 1450 | 25.8-36.4 | 37-45 | 80-86 | 4 |
| 250QS-14 | 320-576 | 8.6-17.5 | 1450 | 15.4-22.1 | 22-30 | 75-85 | 4 |
| 300QS-90 | 540-936 | 57-98 | 1450 | 151-279 | 220-260 | 71-80 | 4.5-6.5 |
| 300QS-58 | 504-972 | 37-65 | 1450 | 99.2-168 | 180 | 78-84 | 5.5 |
| 300QS-19 | 504-935 | 45253 | 1450 | 34.8-49.8 | 45-55 | 75-84 | 5.5 |
| 300QS-12 | 522-900 | 8-14.5 | 1450 | 22.4-33.1 | 30 | 75-80 | 5.5 |
| 350QS-125 | 740-1663 | 77-140 | 1470 | 313-620 | 500-680 | 70-81 | 6.5 |
| 350QS-75 | 900-1440 | 54-80 | 1450 | 175-319 | 250-400 | 78-84 | 6.5 |
| 350QS-44 | 864-1480 | 30-50 | 1470 | 121-188 | 160-220 | 79-84 | 6.5 |
| 350QS-26 | 864-1440 | 16.5-32 | 1450 | 76.5-102 | 110-132 | 73-88 | 6.5 |
| 350QS-16 | 864-1440 | 45219 | 1450 | 47.6-70 | 55-75 | 71-85 | 6.5 |
| 500QS-59 | 1150-2450 | 42-66 | 970 | 273-433 | 315-500 | 72-82 | 6 |
| 500QS-35 | 1550-2410 | 31-40 | 970 | 137-247 | 240-280 | 80-88 | 6 |
| 500QS-22 | 1296-2340 | 14-27 | 970 | 101-148 | 130-180 | 70-82 | 6 |
| 500QS-20 | 2500-3800 | 16-22 | 745 | 215-238.3 | 280-340 | 70-83 | 4.5-5.6 |
| 500QS-13 | 1620-2325 | 10.6-15.2 | 970 | 70-79 | 110 | 85-89 | 6 |
| 600QS-75 | 2300-3930 | 49-80 | 960 | 442-730 | 550-900 | 85-90 | 7.5-8.7 |
| 600QS-47 | 2502-3600 | 32-56 | 970 | 392-460 | 450-550 | 80-88 | 7.5 |
| 600QS-32 | 2304-3960 | 20-37 | 970 | 228-310 | 280-380 | 84-89 | 7.5 |
| 600QS-22 | 2340-3420 | 13-23.5 | 970 | 145-207 | 185-250 | 77-84 | 7.5 |
| 800QS-76 | 4160-6600 | 63-82 | 740 | 976-1384 | 1400-1500 | 86-91 | 7.5-8 |
| 800QS-32 | 4170-6460 | 23-33 | 730 | 391-580 | 450-630 | 78-84 | 6.5 |
Can you produce the pump with my own brand ?
Yes, we have been offering OEM service for 30 years.
Could we pay a visit to your factory?
Yes, you are always welcome to visit our factory.
Is there any after-sales service?
Yes, we can arrange our engineer to go to your application site for assembly or maintenance.
Can you help us do the custom clearance?
Yes, we can. We can help you find a professional custom clearance company to do it.
What information should I let you know if I want to get a quotation?
Please let us know the pump capacity, head, medium, operation situation, quantity, etc.
Can you produce goods with special specification ?
First of all, we need to know the specification in details, and then we need to check with our technology department. We will give customers satisfying reply as soon as possible
){kind=link}